aluminum metal shreds - scrap metal recycling phoenix az

Top 5 Reasons Your Business Should Recycle Aluminum Scrap

Aluminum is an alloy which is a compound made by melting two or more elements together.  One element is metal and the rest consists of non-metal elements.  Aluminum can be a combination of iron, magnesium, silicon, copper, or zinc.  Easily found in our everyday lives, aluminum should always be recycled and there are many benefits to recycling this alloy within your business.  

Why Should I Recycle Aluminum Scrap Metal?

Economic Benefits of Recycling Aluminum Scrap

By recycling aluminum, you are contributing to the economy in a very positive way.  Recycling generates jobs and helps to pay for a vast number of community services.  The aluminum industry pays out close to a billion dollars for recycled aluminum cans each year!  This is money that can go to support local organizations helping people from all angles.

Reduce Landfill Waste

Did you know that more than 100 billion aluminum cans are sold in the United States each year?  We are only recycling less than half of this number.  Similarly, in other countries, about the same amount of aluminum cans are also incinerated or sent to landfills.  Aside from a surplus of cans, imagine the amount of waste that accumulates when we start to discard car, train, airplane parts, and various other forms of transportation.

It’s Easily Found In Everyday Products

Aluminum is a metal we come across everyday.  It comes in all shapes and sizes.  Aluminum can be found as the packaging for beverages, window and door frames, kitchen utensils, and car parts to name a few.

Recycling Aluminum Saves Energy

When aluminum is not recycled properly, cans and other discarded aluminum scrap have to be replaced entirely from raw materials.  This wastes energy, causes environmental damage, and cuts into precious natural resources.  Recycling aluminum saves 90% to 95% of the energy needed to make aluminum from scratch.  According to the Container Recycling Institute, “the energy required to replace a discarded can with new aluminum from bauxite ore is enough to keep a 100-watt incandescent light bulb burning for five hours or to power the average laptop computer for 11 hours.”

Limitless Rounds of Recycling 

Aluminum is a sustainable metal which can be recycled over and over again with no loss of material through the process.  There is no limit to the amount of times aluminum can be recycled.  If you toss an aluminum can into your recycling bin today, it will be recycled and can be back on the store shelf in as little as 60 days!

Learn more about recycling aluminum

CRI is the Best Choice For Aluminum Scrap Recycling in Phoenix

If you’re business produces products with aluminum, you likely have a valuable commodity that is going into the trash! At CRI we understand that scrap is a valuable asset. Our primary objective is to help our partners effectively manage that asset, enabling you to focus on your primary work.

With our extensive fleet of trucks we are in control of all aspects of transportation. This gives us the necessary flexibility to react quickly to service needs. And at no cost to our customers, we offer and provide an assortment of quality containers for all recycling needs.

Call us today to learn more:  (623) 931-5009

Arizona Industrial & Commercial Recycling

Top 5 reasons why your business should recycle copper 

Copper is a highly sought after metal in the scrap metal recycling industry. The reason copper is sought after is because it does not degrade significantly during the recycling process.  Nearly as much copper is recycled as is mined each year in the U.S.  Not including wire production, 75 percent of copper used in the U.S. copper comes from recycled copper scrap. Copper is 100% recyclable and the value of its scrap material can be over 85 percent, and up to 95 percent the price of newly mined organic material. 

Why Do Businesses Recycle Copper?

Recycling Scrap Copper Has Environmental Importance

Copper is an essential trace element that is necessary for the health of animals and plants.  Some environmental benefits of recycling copper include reduced energy requirements for processing, natural resource conservation, and solid waste deviation.  The energy requirements of recycled copper are as much as 85% to 90% less than the processing of brand new copper.  

Recycling Copper Cuts Back on Mining

Simply said, the more copper recycled, the smaller the need for copper mining.  Mining uses up an incredible amount of time, fossil fuels, and energy.  The United States has no need to import copper, according to the Copper Development Association.  This is mainly because of the act of recycling, which provides 95 percent of the copper for domestic usage.

Reduce Landfill Waste by Recycling Industrial Copper Scrap

By recycling industrial copper scrap, you are eliminating the product from taking up space in landfills.  Many things that may be thrown away in the trash could have copper in them.  Office electronics, construction waste, and wiring to name just a few.  The average home can contain 400 pounds of copper.  So, a large corporation could greatly reduce waste by recycling scrap materials.

The Economic Importance of Recycling Copper

Roughly 8% of the world’s copper generation is produced by the United States.  Just about half of the U.S copper production comes from recycled materials, however.  In 2010, recyclers in the U.S. refined 1.8 million metric tons of copper for domestic use and export.

Copper is Everywhere

Copper can be found all over various businesses.  It can be found in the building wire, plumbing, computers and other electronics, built in appliances, company cars, and heating and cooling systems.  By having a business recycling plan in place, your company can help to cut down on waste, lower your carbon footprint, and save money.

Does your Arizona Business Create Copper Waste?

Give Consolidated Resources Inc a call at (623) 931-5009 and we’ll create a custom recycling program to maximize the value of your copper metal waste.

More information about Recycling Copper:

brass metal recycling arizona

Top 5 reasons why your business should recycle brass

Brass is an alloy, which is typically made up of a combination of copper and zinc.  It is quite heavy, yellowish in color with a hint of red in it.  The brass recycling process is simply when scrap brass is recovered from items such as home fixtures or industrial grade piping.  The recovered brass can then be used as organic material to produce brand new products that saves money, energy, and offers a decreased carbon footprint.  The recovery process is used by scrap metal companies to recycle and resell in different forms.  Contractors may have pieces of brass to bring in such as faucets, light fixtures, or tools.  Businesses of all different sizes take part in the recycling of scrap brass.

 Why Should Your Industrial Business Recycle Brass?

Recycling Industrial Brass Reduces Landfill Waste

Scrap brass takes a very long time to degrade. Because it stays around for such a long time, it really has no place in a landfill.  Recycling will allow for endless opportunities for different products to be made without adding to landfill waste.

Recycling Brass Saves Your Business Money

Brass is considered mid-level priced and can add up quickly in weight because of how heavy and dense it is.  You can not only make money, but also recycle the materials at the right place by bringing your metal to scrap yards like Consolidated Resources Inc (CRI). Scrap yards like CRI see a very large quantity of metal from large businesses and the trade industry, and create custom recycling programs for each customer to maximize the value of their scrap metals like brass.

Recycling Brass Saves Energy

Did you know that recycling reduces power expenditure by upwards of 90 percent?  In order to mine organic materials, an enormous amount of energy is needed. Choosing to recycle your businesses brass scrap metal is good for the environment.

Preserve Natural Resources By Recycling Brass

Ore is a naturally occurring solid material from which the metal is extracted from. Not nearly as much ore is required to generate brand new metal, thanks to scrap metal recycling.  This supports the maintenance of the planet’s decreasing natural resources. Recycling your commercial scrap brass metal helps preserve precious natural resources.

Recycled Brass is Easy to Find

Scrap brass is a highly desired metal when it comes to price and demand. You can find brass in so many different places!  From homes and offices, to large construction sites or ships.  Brass is found in door handles, bathroom fixtures, keys, musical instruments, and piping.  This widely used metal is very durable and resists corrosion, yet it can be machined and engraved.

CRI is the Best Industrial Metal Recycler for Brass Scrap Metal

If you’re business creates products with brass, you likely have a valuable commodity that is going into the trash! We can help you maximize the value of that scrap. We are responsive to your business’ needs and handle scrap recycling programs with precision, integrity, and transparency.

With our extensive fleet of trucks we are in control of all aspects of transportation. This gives us the necessary flexibility to react quickly to service needs.

And at no cost to our customers, we offer and provide an assortment of quality containers for all recycling needs. From our dispatcher to our drivers, and everyone in-between, professional customer service and recycling solutions is our top priority. At CRI we understand that scrap is a valuable asset. Our primary objective is to help our industrial partners effectively manage that asset, enabling you to focus on your primary work.

Call CRI to learn more:  (623) 931-5009

To learn more about recycling Brass visit:

Ferrous vs non-ferrous scrap metal

The Difference Between Ferrous & Non-Ferrous Scrap Metal

Both ferrous and non-ferrous scrap metals have value in today’s market. Consolidated Resources, Inc., is Arizona’s expert in optimizing industrial waste streams for the industrial and commercial community. Here’s a quick guide to determine if you’re company creates ferrous or non-ferrous scrap metal.

Ferrous & Non-Ferrous Metals

Both non-ferrous and ferrous metals have specific properties which determine the operations they are best used for.  One main difference is that non-ferrous metals do not contain iron and ferrous metals do.

Common ferrous metals include:

  • steel,
  • alloy steel,
  • carbon steel,
  • wrought iron, and
  • cast iron.

Non-ferrous metals include:

  • lead,
  • zinc,
  • aluminum,
  • copper, and
  • tin.

Precious metals like gold and silver are also considered non-ferrous.

We come across both ferrous and non-ferrous metals in our everyday lives.

Whether this be in the cars we drive, the piping in our homes, or tools and appliances we use.

Ferrous metals

Many ferrous metals tend to be incredibly durable such as steel used in manufacturing industries or cast iron used within stoves and machine tools.  Carbon steel is widely used within the construction industry and can be seen used in anything from kitchen knives to buildings and bridges.

Non-ferrous metals

Non-ferrous metals are much more malleable than ferrous ones are.  Metals such as aluminum and copper can be easily forged.  Aluminum is also lightweight and works well with aircrafts as well as small everyday items such as cans and kitchen utensils.  Lead is seen in electric power cables as well as in batteries and soldering.

Recycling Ferrous & Non-ferrous Metals

It’s really important to understand the differences between these two metals if you are interested in recycling them.  So whether you are in the construction industry, remodeling a home, or are replacing pipes, knowing which metals or electrical parts are recyclable and how they can be recycled is incredibly helpful.

Choose Consolidate Resources for you Ferrous & Non-Ferrous Metal Recycling Needs

Consolidated Resources, Inc. strives to provide the very best industrial metal recycling solutions to businesses in the Phoenix metro area of Arizona.

If your business produces scrap metals, give us a call at (623) 931-5009. We can review your scrap metals, and provide you with a custom recycling program that maximizes the value of your scrap metal. We look forward to discussing your waste stream needs!

Additional Ferrous & Non-Ferrous Metal Information


What Do You Want to Know About Titanium?

At Consolidated Resources, Inc., we believe that the more knowledge our current customers and future customers have regarding the materials that they recycle the better. Much of the recycling problems that we are experiencing today stem from a population that is unaware of the importance, both environmentally and monetary, of recycling. So, to start the spread of knowledge here is some information regarding titanium.

If you are somewhat familiar with the periodic table of elements, you may, in fact, know that titanium has an atomic number of 22 and goes by the symbol Ti. However, there is probably a great deal of information you do not know about titanium, its properties, its uses, why it is important to recycle.

Here are some pretty interesting facts regarding titanium to add to your wealth of knowledge and maybe win that bonus round at trivia night in the future:

  • Titanium was discovered in 1791 in Cornwall, Great Britain. William Gregor is credited with the discovery while Martin Heinrich Klaproth named it after the Greek mythology icons, the Titans.
  • Titans mean “first sons of Earth” in Latin.
  • Almost all living things, bodies of water, rocks, and soils contain titanium. Typically, the element is found within a number of mineral deposits like rutile and ilmenite, both of which are readily found throughout the Earth’s crust. It is the 9th most abundant element in the Earth’s crust, to be specific.
  • Titanium is only found in compounds and does not exist in its pure state in nature.
    • Titanium dioxide is a popular photocatalyst and often used to color white pigments
    • Titanium tetrachloride is used in smoke screens and other catalysts
    • Titanium trichloride is used as a catalyst in the production of polypropylene 
  • Iron, aluminum, vanadium and molybdenum are all common materials that titanium can be alloyed with as well as other elements.
  • Titanium is used to produce strong, lightweight alloys for a variety of industries including:
    • Aerospace
    • Military
    • Industrial processes
    • Automotive
    • Agriculture and food
    • Medical devices and instruments
    • Sporting goods
    • Jewelry
    • Mobile phones
  • Corrosion resistance is perhaps the most desirable feature of titanium, along with its extremely high strength-to-density ratio (highest of any metallic element). Because of its strength and weight, it is extremely important to the aerospace, military and medical industries.
  • Boeing’s 737 Dreamliner is made of 15 percent titanium.
  • While 60% more dense than aluminum, titanium is more than twice as strong. Its strength is on the same level as steel but weighs in 45% lighter.
  • Titanium can be used for the long-term storage of nuclear waste because of its ability to resist corrosion. Containers made out of titanium may be able to last up to 100,000 years.
  • Spoiler Alert: some 24k gold isn’t pure gold but instead, an alloy of 1% titanium. While not enough titanium is added to change the karat of the gold but does make it much more durable than pure gold.
  • Categorized as a transition metal, titanium has some properties (like strength and melting point) that are similar to other metals but is a poor conductor of heat or electricity, not very dense and is non-magnetic.

At Consolidated Resources, Inc., we strive to provide the very best industrial recycling solutions to Arizona businesses. So, whether your business has large quantities of scrap metals or plastics that need to be recycled rather than discarded, give us a call at (623)931-5009 or click here to learn about the services we offer.

Surprising Aluminum Facts You Probably Didn’t Know

Aluminum is one of the most abundant metals and because of this factor, the price is much lower than similar materials. Based on simple economic principles, when a price is low, there isn’t much benefit seeking alternative sources of supply.

Applying this principle to aluminum, recycling efforts and results are not where they should be considering that aluminum is the most recyclable of all materials. Even though the price is low for newly produced aluminum, it is still cheaper to reuse aluminum. Let’s take a look at some facts and figures about aluminum to help put this recycling issue into perspective and how important even a little difference can make. At Consolidated Resources, Inc. we strive to provide the businesses we serve with comprehensive solutions because by recycling your business can save money in the long run and help the environment.

Here are some surprising aluminum facts:

  • In 2017, the United States produced 785,000 metric tons and imported just over 5 million metric tons. This enormous dependence on foreign aluminum puts American companies that rely on raw aluminum at a disadvantage when it comes to prices that are dictated by market prices and tariffs.
  • China leads the world in aluminum production with 31 million metric tons produced in 2017. This represents over 50% of the global production of aluminum. The US ranks ninth in the world based on production.
  • Discarded aluminum is the most valuable material in recycling because of the minimal processing required to repurpose it. In aluminum cans alone, Americans throw away nearly $1 billion worth of aluminum every year.
  • With a 67% recycling rate for aluminum cans, the aluminum industry pays out more than $800 million each year for recycled cans.

  • Aluminum can be recycled infinitely, which is why it is so valuable. Other materials may require expensive and lengthy processes to repurpose the materials.
  • Approximately 60 days is the length of time that it takes for aluminum to be recycled and reused.
  • 75% of all aluminum produced in the last 100 years is still in circulation today. This is an amazing percentage but still not good enough considering the value and ease that aluminum can be recycled and reused.
  • Using one ton of recycled aluminum vs. producing raw aluminum saves more than 1,600 gallons of oil. More than 120,000 aluminum cans are recycled in the US every minute. It takes roughly 31 cans to equal one pound (62,000 cans equals 1 ton), so after doing a little math, it only takes about 30 seconds to save 1,600 gallons of oil.
  • However, on average, each American only recycles 2/3 aluminum cans that they use (how 67% was figured).
  • Current aluminum $/lb hovers right around $0.99/lb.
  • The top uses of aluminum in the United States are:
    • Transportation- high strength: weight ratio, alloying with other metals, corrosion resistant
    • Construction- easy to shape, corrosion resistant, thermally efficient, cheaper
    • Electrical- low density for long distances, very ductile, corrosion resistance
    • Consumer goods- electronics, interior design items, beverage containers, kitchen products

Whether your business manufactures car parts or household lamps, aluminum is an important component of a variety of products and these aluminum recycling facts help put things into perspective. We, at Consolidated Resources, Inc., want to help your business save money by providing complete recycling solutions that are custom-tailored to fit your exact needs. We offer everything from custom-built recycling storage to scheduled pickups and we pride ourselves on excellent customer service. To learn more about how we can help your business, visit our services page.

Does Recycling Help the Economy?

As the world’s population increases at an exponential rate, the amount of waste that is produced increases at an alarming rate as well. Americans represent roughly 5% of the world’s population yet we produce nearly 30% of the world’s waste.

However, on a positive note, over a third of the waste produced in the U.S. each year is recycled or composted. While there is still a lot of room for improvement, there is an obvious effort being made. The numbers of natural resources available to us are limited, and at some point in time, these resources may run out. Fortunately, we are able to recycle a vast majority of these materials which not only helps the environment, but helps the economy as well.

How Recycling Helps the Economy

There are several ways that recycling helps the economy on both a personal and business level. Here are just a few examples.

Generates Jobs and Tax Revenue

According to the Environmental Protection Agencies 2016 Recycling Economic Information report, the recycling and reuse of material in the United States generated 757,000 jobs, $36.6 billion in wages, and $6.7 billion in tax revenues significantly contributing to the U.S. economy. These numbers will continue to grow as our efforts to recycle more materials increases.

Cost Effectiveness

When it comes to running a waste management facility compared to a recycling facility, the cost differences are clear. Operating a recycling facility is far more efficient and cost-effective than a waste management facility that either incinerates or buries the waste. Studies have shown that recycling one ton of waste has twice the economic impact that incinerating or burying does.

Depending on the material, it can cost 90% less to process recyclable material in to new material than the cost of extracting and refining raw materials from nature. These production cost savings are often passed along to the consumer.

Here are some quick facts on how using recycled products saves money, energy, and effort:

  • 1 ton of recycled paper saves 17 trees, 7,000 gallons of water, energy equivalent to 165 gallons of gasoline and 3 cubic yards of landfill space.
  • Recycling steel and tin saves 74% of the energy used compared to raw materials.
  • Aluminum is the most recycled item in the US and can be recycled without limit.
  • Plastic and glass can be recycled over and over while maintaining the same level of purity.
  •  80% of glass is estimated to be recycled into new containers.

As you can see, with increased recycling efforts from individuals and businesses alike, we will continue to see positive results both economically and environmentally. When it comes to recycling, Consolidated Resources provides customized, comprehensive, waste stream solutions to fit your business’s needs. Call today to learn what CRI can do for you.


3 R’s of the Waste Reduction Hierarchy

As the world’s population increases at an exponential rate, the human footprint that is made on our planet is shocking. In America alone, more than 250 million tons of trash is produced, yearly. Try and conceptualize just how much that truly is would be nearly impossible.

Landfills are overflowing, polluting our waters and contributing to climate changes that impact ecosystems. Now, more than ever, it is absolutely crucial that the human population starts to understand the consequences of our waste production before the issues become irreversible.

One way we can all help make a difference is by applying the “waste hierarchy” to our personal lives and businesses. This hierarchy involves three very simple words that will ultimately lead to less waste generation.

The 3 R’s of Recycling are: reduce, reuse and recycle.


Being conscious of the amount of waste that is produced is the very first step in this waste hierarchy. The concept is that if less waste is produced then there will be even less to reuse or recycle. There are a few simple assessment steps that can ultimately help reduce the amount of waste that is produced.

  • Multipurpose – living a lifestyle that utilizes items that have multiple purposes is essential to the reduction of waste. Do the products you use have multiple purposes or are they very limited and specific? For example, you may own a coffee pot and a cappuccino maker, both of these items do different tasks but there are attachments to coffeemakers that can be purchased to turn a coffee pot into a multi-use item. Applying this thought process to your future purchases will help reduce the amount of production and the amount of waste packaging.
  • Multiuse – many products available today are labeled as disposable, which adds a level of convenience for us. Instead of using plastic bags (either for food or shopping) that will be thrown out after each use, try investing in options that can be used over and over. Washable food storage containers, reusable grocery bags and other daily items that we buy and can be used multiple times.


It is such a simple, convenient act to throw away used, old and even broken items that we may not have an exact purpose for. Reusing items, finding new uses for discarded items and donating the items you don’t have a need for are great ways to help eliminate the extraordinary amount of waste that is generated each year. Some examples of this include:

  • Keep items that may not have a purpose at this very moment but could be used later on.
  • Old clothes can have many purposes such as being turned into rags, blankets and even toys for pets.
  • Old furniture or appliances can be sold online or even donated to those looking for secondhand items.
  • Invest a little time, money and effort into fixing or updating items rather than just throwing them out.

It is extremely easy to just throw items away that become obsolete or even broken but taking that little bit of extra effort to repurpose them can make a huge impact.


This is the last step in the waste hierarchy because out of the three R’s of waste management, recycling actually costs a significant amount of money and requires extensive processes. However, recycling costs much less than harvesting and producing new materials and cuts down on the overall pollution significantly.

The biggest challenge that is faced when trying to recycle is convenience. Recycling does take effort because more often than not, the programs in place require the recyclable materials to be separated from normal waste. Taking the time to make the conscious effort to recycle all materials can have an important impact.

While many communities offer their residents recycling programs, businesses face a more difficult time finding solutions for their recycling needs. Luckily, for businesses around the metro Phoenix area Consolidated Resources, Inc. offers comprehensive recycling and waste management solutions to fit any needs.

Whether your business is seeking customized material storage or flexible pickup scheduling, CRI offers it all. For nearly 30 years, CRI has been providing exceptional customer service to businesses from Casa Grande to Prescott Valley. Call (623)931-5009 today, to learn how CRI can help solve your business’s unique recycling needs.

3 Great Benefits of Recycling Aluminum

When it comes to the most abundant metal found naturally on Earth, there is only one clear answer: aluminum. Putting that into perspective, the amount of aluminum makes up about 8% of the Earth’s land mass, which makes it extremely common. This may not seem that impressive, but when you figure that aluminum weighs 1/3 of gold or copper for the same volume, it is easy to comprehend just how much aluminum is present.

While aluminum is very common, recycling efforts are still important. Just like all naturally occurring elements and minerals on Earth, there is a limited amount. While this amount is nearly incomprehensible as discussed above, the human race has had a significant impact on the natural resources and environment since our beginning.

Now, more so than ever, the efforts made to increase recycling awareness and participation are crucial. Environmentally and economically, recycling aluminum presents multiple benefits.

Here are some of the top facts and benefits of recycling aluminum:


Not only is aluminum valuable because it is a metal, but it is also the most valuable item in your recycling bin due to the easy of reprocessing recycled materials vs. processing raw materials. The reason this is true is that it takes roughly 95% less energy than using virgin ore.

To put this into comprehensible terms, using one ton of recycled aluminum saves over 1,600 gallons of oil. This is a huge benefit of recycling when thinking about the carbon footprint and burning of fossil fuels. When it comes to money, the aluminum industry pays out over $800 million a year for recycled cans alone.

The scary part of this is that aluminum cans only have a 67% recycling rate (lots of money thrown away each year in cans alone). The current price of aluminum is just over $0.90/lb and the prices of recycled aluminum (depending on the type) are less.

Cycle Time

In just as little as two months, that aluminum product that you recycled can be processed and reused. Depending on the alloy made with the aluminum, the process length can vary but the cycle time is extremely short.

If the aluminum is going to be repurposed into the same type of products, the process is much simpler and basically only requires melting of the recycled aluminum. However, if new alloys are to be made from different aluminum alloys, the materials are sent to refiners that have special equipment for melting and separating the raw materials.


Perhaps one of the greatest advantages of recycling aluminum is the fact that it can be infinitely recycled and reused. Roughly 75% of all the aluminum that has been produced in the last 100 years is still in use today. No other material can boast such an incredible figure.

This is only possible because aluminum never loses any of its properties or characteristics, despite the number of times it has been recycled. Because aluminum is always used in alloys, the durability is great because it is strong, lightweight and resists oxidation and corrosion.

There uses for aluminum are tremendous and the main industrial uses are for transportation (cars, trains, etc.), construction (due to its strength to weight ratio), electrical (lightweight and extremely ductile) and consumer goods.

If your Valley business produces recyclable aluminum scrap and you have been searching for a better recycling solution, call Consolidated Resources, Inc. We have been serving the Valley and Arizona for nearly 30 years and pride ourselves on custom-tailoring recycling solutions ranging from storage to comprehensive service. So let CRI help your business save money and save the planet.

13 Things You Can’t Recycle

While taking care of the planet has always been important, as of the last 10 or so years the environment and our impact on it has been in the mainstream. Climate change, pollution, carbon footprint, greenhouse gases and many others have been topics of many discussions from the dinner table to multinational government summits.

When it comes to recycling, no effort is too small to make a difference because if we all pitch in (even just a little bit) the impact can be great. There are the few main items that everyone knows are recyclable (paper, plastic, glass, etc.) but there are several items that are often lumped into those categories that are, in fact, not recyclable.

Here is a list of the most common items sorted out of the recycling bins:

  1. Used food containers

Even if they are made from paper or cardboard like a Chinese to-go container or pizza box, these items should be left out of your recycling bin because (unless they are washed) the food particles and grease contaminate the recycling process. The oils cannot be separated from the paper fibers.

  1. Plastic bottle caps

These caps from pop bottles, detergent containers and similar items cannot be recycled because they are made from polypropylene (plastic #5).

  1. Plastic grocery bags

Much of the sorting process is done by machine at recycling facilities, which means that plastic bags often cause more of a hindrance of damaging equipment than good. Most grocery stores accept used bags though.

  1. Styrofoam

This one is usually a shocker but because Styrofoam is a petroleum product, it is extremely flammable. Due to this characteristic, it makes it dangerous to have in the recycling facilities.

  1. Wet/Used paper products

These fall into the same category as used food containers.

  1. Plastic coated cardboard

Due to the special coating to make them more durable or other reasons, plastic coated cardboard like juice boxes or special product packaging should not be thrown into the recycling bin. The coating prevents the fibers from being broken down during the recycling process.

  1. Certain glass types

Commonly found in the kitchen, special types of glassware have been treated to withstand higher temperatures, which hinders the recycling process that involves melting of glass. Common types include- Pyrex, light bulbs, fluorescent lights, window glass, mirrors, eyeglasses and glass art.

  1. Wire hangers

Another surprise to the list, wire hangers cause recycling centers issues because they are not set up to handle any type of wire. If you are looking for a place to repurpose these, most dry cleaners will accept them.Wire hangers

  1. Heavily dyed

Since recycled paper needs to be soaked to help separate the fibers, the dye from colored papers will contaminate the process much like a red shirt in a load of whites when doing laundry.

  1. Aerosol cans

Unless completely empty, most recycling centers won’t accept these products due to danger.

  1. Batteries

Batteries should be taken to special locations that accept them because they contain heavy metals and harmful chemicals that can leak when batteries become corroded. The danger occurs when these metals and chemicals reach the drinking water. Please keep batteries out of the trash and recycling bins.

  1. Disposable diapers

Even though you may think it is a terrible waste by throwing away thousands of these during your baby’s life, disposable diapers are not recyclable.

  1. Household chemicals

Common treatments of these types of products are either pouring them down the drain (corrode plumbing/contaminate water table) or throwing them in the trash (make their way to the soil and water table). Most cities will have locations that you can take hazardous materials to dispose of them properly.

While these products are more common in households, your business still may produce some of them. Many cities offer great recycling programs for its residents but businesses are often left to fend for themselves. Let Consolidated Resources, Inc. help your business recycle efficiently by providing comprehensive solutions that fit your business’s exact needs. For nearly 30 years, CRI has been serving the industrial recycling needs of businesses of Arizona.

Find out what ORANGE and BLUE can do for you!

Phoenix Metal Recycling Industrial & Commercial
Tap to Call
(623) 931-5009